Conversion tracking for Google Ads
Give your AI tool the conversions summary and conversions by action and day. It finds the actions that double count or stopped, the day each one broke, what that did to the Conversions column bidding uses, and who should check what on the site.
npx skills add parallel-ai-inc/google-ads-skills -gInstalls all 13 skills in Claude Code, Codex, Cursor and other tools. Steps for each tool
Conversion breaks
Account
The Conversions column for the whole account, between the days the breaks start and end:
| From | To | Days | Conversions a day | All conv. a day | Breaks that start |
|---|---|---|---|---|---|
| 2026‑10‑14 | 2026‑10‑26 | 13 | 13.08 | 21.15 | |
| 2026‑10‑27 | 2026‑11‑03 | 8 | 19.88 | 21.25 | B1 |
| 2026‑11‑04 | 2026‑11‑12 | 9 | 16 | 18.11 | B2 |
- Effect of the breaks on Conversions over the report, each at its action’s earlier rate: rises add 109, falls take away 24.43, net +84.57. These are estimates.
- On the last day the breaks still open change Conversions by +3.70 a day: B1 +6.41; B2 −2.71. Conversions ran at 16 a day from 2026‑11‑04; without those breaks it would be about 12.3 a day, against 13.08 a day from 2026‑10‑14 to 2026‑10‑26. This is an estimate.
- No break in the account total. A break in one action can hide inside a steady total when another action grows, so each action was checked on its own.
What to give it
For the audit, the conversions summary. In Google Ads, open Goals, Conversions and All conversions, pick the last 30 days, add View-through conv. window, Attribution model, Conversions and All conv. value where Columns offers them, and download it as a CSV.
For a debug, conversions by action and day, from the Report editor with Day, Conversion action and Campaign as rows, over 30 to 60 days that start well before the problem. Clicks by day and the change history are optional and worth adding. With clicks, the skill says whether traffic carried on through a break.
What you get back
conversion-audit.xlsx and conversion-audit.mdThe audit. Primary actions not recording, two Primary actions in one category, lead actions counted as Every, and where the conversions are.conversion-breaks.xlsx and conversion-breaks.mdThe debug. Each break with its day, its share of conversions, its effect on the Conversions column, the campaigns that carried it and the account changes just before.
In the chat, your AI tool answers what you asked first, then each break with its day and effect, and the checks to make outside Google Ads, by who usually makes them.
The checks outside Google Ads go to whoever can make them
A report cannot see the website, the tags, consent or uploads, so every cause there is a lead to check, not a finding. The skill writes each check for the person who usually does it, labelled like every rule.
| Who usually does it | Check | Label | For breaks |
|---|---|---|---|
| You, in Google Ads | Read the change history for the days just before 2026‑10‑27. Look for this action changing between Primary and Secondary, or a campaign changing the goals it uses. | Practitioner rule | B1 |
| You, in Google Ads | Check which goals each affected campaign uses, and whether a custom goal is in play. A report does not show this. | Official | B1 |
| You, in Google Ads | In Google Ads, open Goals, Conversions, All conversions and hover over the Tracking status of this action. Google shows its own diagnosis there. | Official | B2 |
| You, in Google Ads | Read the change history for the days just before 2026‑11‑04. Look for edits to conversion actions, to goals, and to the goals a campaign uses. | Practitioner rule | B2 |
| The website developer | Ask what changed on the website on or just before 2026‑11‑04: a release, a new form or checkout, a new confirmation page address, or a tag manager publish. | Practitioner rule | B2 |
| The website developer | Check the consent banner. Default consent states must be set before any tag sends data, and updated after the visitor chooses. Check ad_user_data and ad_personalization, not only cookie storage. | Official | B2 |
| The website developer | Confirm the click identifiers still reach the site and the tag: gclid, gbraid or wbraid. | Practitioner rule | B2 |
| Whoever manages Google Tag Manager or GA4 | Trigger the conversion yourself on the live site and watch the tag. Tag Assistant does this: in Goals, Conversions, All conversions, hover over the Tracking status and choose Troubleshoot. | Official | B2 |
| Whoever owns the booking or form tool | Ask whether the booking or form tool changed on or just before 2026‑11‑04: a new version, a new domain or a new confirmation page. A tool on another domain can lose the tag or the click identifier. | Practitioner rule | B2 |
How it decides
Scripts compute every number, and your AI tool states no figure they did not print. Each rule it applies is labelled Official, from Google’s documentation, or Practitioner rule, from Parallel AI’s operating knowledge.
- Bidding uses a conversion action only when it is Primary and in a goal the campaign uses. Secondary actions are reported in All conv. only, unless a custom goal includes them.OfficialGoogle Ads Help, About primary and secondary conversion actions
- Two Primary actions in one category from different sources can be the same event counted twice. Confirm what each one records before changing either.Practitioner rule
- A data exclusion reduces the effect of a tracking outage on Smart Bidding, and Google says not to remove one once applied.OfficialGoogle Ads Help, About data exclusions
- When the conversion signal is broken, repairing tracking comes before any optimization, and changes to bids, targets and budgets stay provisional.Practitioner rule
What it does not cover
- The website, the tags, the consent banner and any upload. The checks say what to look at there.
- Which goals each campaign uses. A report does not show this.
- Conversions still arriving. Google Ads reports a conversion on the day of the click, up to 90 days later, so a fall in the last days can be a delay, not a break.
- An action whose conversions are too few to tell a stop from chance.
When you want it on live accounts
The skill reads one account’s exports at a time, and fixing the settings is up to you. Parallel AI checks conversion tracking on your live Google Ads accounts, every client at once, and changes the conversion action settings in the account.
The page for this job in Parallel AI is Audit every Google Ads account you run, then fix what matters.
The guide behind this job is Why GA4 and Google Ads show different conversion numbers.
Install
In Codex, Cursor, Gemini CLI, GitHub Copilot, Windsurf, OpenCode and other tools that read Agent Skills, the open skills CLI installs every skill in the pack.
npx skills add parallel-ai-inc/google-ads-skills -gIn Claude Code, add the pack as a plugin from a session.
/plugin marketplace add parallel-ai-inc/google-ads-skills/plugin install parallel-ai-for-google-ads@parallel-ai
To install this skill alone, name it.
npx skills add parallel-ai-inc/google-ads-skills --skill conversion-tracking-for-google-ads -gAdd -a with a tool’s id, such as codex or cursor, to install for that tool alone. Without -g, the skills install into the current project.
Questions and answers
Does the skill cost anything?
No. The skills are free to use for any Google Ads work, for yourself or for clients. They may not be republished as your own skills. Parallel AI is a separate product, with a 5‑day free trial.
Does it change my Google Ads account?
No. It never connects to an account on anyone’s behalf and never changes one. It reads the reports you give it and writes files. Where a job ends in a change, it writes a Google Ads Editor file, and you check it there before posting.
Where does my data go?
The skill’s scripts make no network calls, and nothing goes to Parallel AI. Your AI tool sees the files you give it, as it would any file, under that tool’s own terms. If the export is a client’s, check your agreement with that client before you give it to an AI tool.
Why does it need a report from the Report editor?
A table in the Campaigns view can be segmented by Day only for 16 days or less, and a break is easiest to see over 30 to 60 days. The Report editor gives the longer range.
Which AI tools can run it?
Tools that read Agent Skills and can run Python, such as Claude Code, Codex, Cursor, Gemini CLI, GitHub Copilot, Windsurf and OpenCode. The scripts use Python 3’s standard library only.
Is Northside Plumbing a real business?
No. Northside Plumbing is the pack’s made up sample account, with problems planted for each skill to find. Run the skill on the sample files and you get the same figures as this page.
Google Ads is a trademark of Google LLC. Parallel AI is not affiliated with or endorsed by Google.
Keep conversion tracking right on every account
Parallel AI reads your live Google Ads accounts, finds the actions that double count or stopped and changes their settings in the account, across every client at once.
Starter $20, Pro $60 and Max $200 a month
You connect Google Ads first, then add a card to start the trial.